Remove Windshield Base - Zontes ZT350-VX 2022 Service Manual

7、FRONT FORK COMPONENT
Fig.20FRONT FORK
COMPONENT
NO. PART NO.
1 1251112-001093 M6×16 Hexagon flange bolts (color Zinc)
2 1274100-007000 ZT250-S flanging sleeve(φ6.4×φ9×6＋φ20×2)
3 1244100-004000 ZT250-S Flanging bushing buffer
4 1186200-016000 ZT310T-M windshield motor controller(limited time)
5 1274300-070021 ZT350-VX windshield motor controller bracket
6 1251100-102000 Non-standard bolt M6×16 (304 stainless steel)
ZT310-VX adjustable instrument lower bracket(dark
7 4024200-096051
grey matte)
8 1274200-203000 ZT310-X1 windshield base
PROCEDURE:
●Electrical devices
First, unplug the motor controller.
Remove the 2 bolts ⑴ at a with an 8# sleeve, remove the bushing ⑵and remove the controller⑷. Remove
the cushion rubber⑶ from the controller.
Use a 8# sleeve remove the bolt ⑴ at bracket⑸，then take off the bracket⑸.
Remove the 2 bolts⑹ with a 4# inner hexagon, and then remove the lower bracket ⑺ of the instrument.
Remove 4 pieces of cushion rubber ⑶ from the windshield base ⑻.
CAUTION:
●Do not pull the cable directly when pulling the plug.
CHK

Remove windshield base

ADJ
PART NAME QTY
7
6
6
1
1
2
1
1
80
CAUTION