Frame, Side Bracket - Zontes ZT350-VX 2022 Service Manual

1、FRAME COMPONENT
Fig.5 FRAME&ELECTRONIC PARTS
COMPONENT
NO. PART NO.
ZT350-V1 frame after-sales assembly(including
1 4014300-015000
seat/310M nameplate)
2 1130900-026000 ZT250-S upper steel bowl
3
1134300-001000 ZT350-R lower seat ring
4 1264100-001000 ZT250-S side stand spring
5 1274200-289000 ZT310-T side bracket (dark gray)
6 1251100-088094 Non-standard bolt M10×1.5×43(Dacromet)
7
1251700-025091 ZT250-S side stand sleeve
8 1251300-057093 Non-standard nut M10×1.5(Dacromet)
PROCEDURE:
●Checking the cushion loop
Checking whether the seat ring ⑵ and ⑶ is frayed, If yes, it needs to be replaceds. Fix the seat ring well and
paint the lubricating grease on it with appropriate tool.
●Sider support
The thick steel wire shall be rolled into a circle and put into the spring (4) hook. Pay attention to ensure that
the steel wire cannot be loosened or scattered during the pulling process. And guard against the personal
injury caused by spring contraction, remove the nuts ⑻ and bolts ⑹ with the 14# sleeve. Remove the side
support ⑸ and bush ⑺, paint the lubricating grease on the bush⑺ when re-assembling ,then put it into the
frame ⑴.
CAUTION：
●Remove the wind deflector component, handle bar component, steering column component first.
●Paint the lubricating grease on the cushion ring to decrease the rotary resistance of front forklift.
CHK
Frame, Side support
ADJ
QTY
PART NAME
1
1
1
1
1
1
1
1
12
CAUTION