Table of Contents
Advertisement
4、REAR WHELL COMPONENT
Fig.6 Rear wheel, swinging
arm component
NO.
PART NO.
1
1181200-118000 Wheel speed sensor(A)
2
1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
3
1251100-123093 Non-standard bolt M8×25 (color Zinc)
4
1250104-006097 GB16674M6×12 (chromed/HH)
5
1274200-119000 Single rocker rear flat fork tubing bracket
6
1224100-037000 Grade 0 flame retardant tie (black 3.6×295)
7
1251100-117093 Non-standard inner hex bolt M8×25 (color Zinc)
8
1274200-058000 ABS induction ring (60 teeth)
9
1100100-784000 ZT350-GK rear brake disc (265×4.5)
10
4024200-048000 ZT310 single rocker rear axle assembly (with bolt)
11
1250305-002091 GB6187.1 M8(White Zinc)
12
1251100-191000 Non-standard bolt M12×1.5×38 (color Znic)
PROCEDURE:
●Rear axle outer assembly
To remove only the rear axle assembly, simply use a 14# sleeve to remove the 2 bolts (3) and remove the
caliper from the mounting plate. Remove the rear axle assembly.
To replace the rear fork, you need to continue with the following steps:
Using 4# inner hexagon socket remove the bolt (2) and remove the wheel speed sensor (1) from the rear disc
brake caliper mounting plate.
Using 8# sleeve remove the 4 bolts (4) and remove the tubing bracket (5).
Cut the strap (6) , and find the inside of the left rear skirt and remove the joint of the rear slab adapter cable.
Locate the wheel speed sensor connector near the right air filter and remove it, and remove the wheel speed
sensor (1).
●Rear axle assembly
Fix the bolt (7) with a 6# hexagon socket and then remove the nut (11) with a 14# sleeve.
Remove the induction ring gear (8) and the disc brake disc (9) from the rear axle assembly (10).
The rear axle assembly (10) already includes the rear axle and 5 bolts (12). The bolts (12) and the single
rocker rear axles have an interference fit. If the bolts are removed and replaced separately, the connection
must be firm and reliable, otherwise it may loosen and cause accidents. The bolt heads of the early production
models are round and can be replaced directly with the trimmed state of the later production.
CAUTION:
●The replacement of the bolts (12) separately must be secure and reliable.
CHK
Rear axle assembly
ADJ
PART NAME
QTY
1
1
2
4
4
1
5
1
1
1
5
5
28
REMARKS
24N.m
after-sale
Advertisement
Table of Contents
