Storage Box, Rear Surrounding Components 2 - Zontes ZT350-VX 2022 Service Manual

7、FRONT FORK COMPONENT
Fig.22FRONT FORK
COMPONENT
NO. PART NO.
1 1251100-102000 Non-standard bolt M6×16(304 stainless steel)
2 1274100-057095 Flanging bushing φ6.2×φ8.5×3.5＋φ14×1.5
3 1244100-052000 Buffer rubber of flanging bushing （φ8.5×φ14×1）
4 1251300-063093 Plywood M6×11×15(color zinc)
5 1224200-182000 Left storage box cover limit mounting support
6 1224200-187000 ZT310-VX left storage box cover
7 1274100-090000 ZT250-S rotating axle of fuel tank outside cover
8 1260100-215000 ZT310-T storage box cover rotating shaft limit circlip
9 1224100-014000 ZT250-S tank cover spinning damping
10 1260100-269000 ZT310-VX storage box return spring
11 1224200-186000 ZT310-VX right storage box cover
12 1224200-183000 Right storage box cover limit mounting support
PROCEDURE:
●Storage box cover
Use 4# inner hexagon to remove 2 bolts ⑴, remove bushing ⑵ and cushion rubber ⑶.
After removing the circlip ⑻, move the left storage box assembly to the position, remove the rotating shaft
⑺, damper ⑼ and spring ⑽, and separate the left storage box cover ⑹ and the left mounting support ⑸.
Remove the 2 pieces of splint ⑷.
Refer to the above steps to remove the right storage box cover ⑾ and the right mounting support ⑿.
CAUTION:
●When reinstalling, make sure that the spring ⑼ is inserted into the upper hole of the storage box cover; the
anti-rotation slot of the damper ⑻ should be aligned with the storage box cover.

Storage box, rear surrounding components 2

PART NAME
82
CHK
ADJ
QTY CAUTION
4
4
4
4
1
1
2
2
2
2
1
1