Operating and Maintenance Manual
2.
Pull down the lever (2) and position the
bracket support (6) in one of the three set-
tings available: control console down (3),
horizontal (4) and up (5).
3.
Pull down the lever (2) and fold down the control console until it locks into place.
■
Folding up and down the control console
■
Pull down the lever (2) and fold up the control console until it locks into place.
■
Pull down the lever (2) and fold down the control console until it locks into place.
5.9.2
Keyboard 1
Pos.
Name
A36/ 1 Push-button: Park-
ing lights / low
beam / high beam
A36/ 2 Push-button: Work
lights front/rear
56
(255)
Figure 16: Controls on Keyboard 1 (A36)
Description
■
Press push-button once = parking light ON
■
Press push-button again = low beam ON
■
Press push-button again = high beam ON
■
Tap push-button (with high beam ON) = switch between low and
high beam
■
Press the push-button for 2 s = OFF
■
Press push-button once = work light front/rear ON
■
Press push-button again = work light front ON
■
Press push-button again = work light rear ON
■
Press push-button for 2 s = work lights OFF
5 - Vehicle
Snow groomer BISON
BISON 908930245 - 30367