Roll Out Remote Control (Optional) - Prinoth BISON Operating And Maintenance Manual

Operating and Maintenance Manual
The winch arm movement corresponds to the movements carried out with the mini-joystick T:
■ Keep push-button S3 pressed and move mini-joystick to the left = Swivel winch arm to the left
■ Keep push-button pressed and move mini-joystick to the right = Swivel winch arm to the right
You do not have to move the joystick.
Figure 127: Functions available through mini-joystick T
Automatic cable traction control
■ In some working conditions, more cable traction force may be required than the traction control is
programmed to provide. The mini-joystick T can be used to control cable traction:
□
□
■ When mini-joystick T is pushed forward again within 8 s, a time interval of 8 s starts.
■ In some working conditions, less cable traction force may be required than electronically speci-
fied. The mini-joystick T can be used to control cable traction:
□
□
■ You do not have to move the joystick.
Manual cable traction control
■ If the mini-joystick T is pushed forward, the cable traction force is increased:
□
□
■ If the mini-joystick T is pushed backward, the cable traction force is reduced:
□
□
■ You do not have to move the joystick.
15.7.4

ROLL OUT remote control (optional)

With the ROLL OUT remote control, the operator can rewind or unwind the cable while standing along-
side the vehicle. The ROLL OUT remote control is located in the driver's cab on the right behind the
driver seat.
228
(255)
Keep push-button S3 pressed and push mini-joystick T forward for 2 s = Cable traction force
is increased to MAX
After 8 s = Cable traction force is reduced to the preset level
Keep push-button S3 pressed and push mini-joystick T backward = Cable traction force is
reduced to MIN
Keep push-button S3 pressed and push mini-joystick T backward again = Cable traction
force is increased to the preset level
Keep push-button S3 pressed and push mini-joystick T forward = Cable traction force is in-
creased gradually
Keep push-button S3 pressed and push mini-joystick T forward for 2 s = Cable traction force
is increased to MAX
Keep push-button S3 pressed and push mini-joystick T backward = Cable traction force is
reduced gradually
Keep push-button S3 pressed and push mini-joystick T backward for 2 s = Cable traction
force is reduced to MIN
15 - AUTOMATIC Winch
Snow groomer BISON
BISON 908930245 - 30367