Keyboard 2 - Prinoth BISON Operating And Maintenance Manual

Operating and Maintenance Manual
Pos. Name
9 Traction force as %
10 Economical range indica-
tion in tachometer
15.7.2

Keyboard 2

Figure 124: Keyboard 2 (A37) on the control console
Pos. Name
A37/6 Unwinding
the cable
A37/7 Winch oper-
ation
A37/11 Rewinding
the cable
A37/12 Rewinding
the last few
meters of ca-
ble
226
(255)
Image Description
Indicates cable traction force in %.
■ In automatic cable traction control mode (A and A-ECO),
the effective traction force is displayed.
■ In manual cable traction force control mode (hand), the
specified cable traction force is displayed.
In winch operation, the economical range switches from 1300 -
1600/min to 1400 - 1700/min.
Description
Pressing the push-button switch activates cable unwinding in manual mode
or when using the ROLL OUT system.
■ Manual mode: This means that manually pulling the cable unwinds it. If
the cable is released, unwinding will be stopped.
Pressing the push-button switch activates winch operation.The menu can be
used to select between manual or automatic traction force control.
If the cab door is opened during winch operation, there are two possibilities:
■ If the cable is not tensioned, winch operation is deactivated. Winch op-
eration must be reactivated again after the door is closed.
■ If the cable is tensioned, winch operation will remain activated.
Pressing the push-button switch for 2 s activates manual cable rewind. This
means that manually pulling the cable rewinds it. If the cable is released, re-
winding will be stopped.
Press the push-button switch to rewind the last approx. 2 m (6 ft) of cable
(this function may only be used for the last few meters of cable).
"Rewind the last few meters of cable" (p. 230)
15 - AUTOMATIC Winch
Snow groomer BISON
➽ See
BISON 908930245 - 30367