Rear Tiller; Mounting The Posiflex Tiller - Prinoth BISON Operating And Maintenance Manual

Operating and Maintenance Manual
9.3

Rear tiller

9.3.1

Mounting the POSIFLEX tiller

CAUTION
Risk of crushing
When moving the snow groomer up to the rear tiller.
► Keep the danger zone clear of personnel.
NOTICE
Risk of damage to the hydraulic system
Even the smallest particles of dirt or impurities getting into oil the when connecting the rear attach-
ment can cause damage to the hydraulic system.
► Attachment mounted: store the protective caps in the driver's cab's tool compartment.
► Attachment not mounted: cover the quick-connect couplings with clean protective caps.
Pos. Name
1 Articulated arm
2 Nut
3 Threaded rod
4 Top coupling point
5 Tool
6 Locking pin
7 Automatically raise rear tiller when reversing ON/OFF
The rear tiller is mounted on the rear of the snow groomer using quick-connect couplings:
1. Clean the contact surfaces between rear tiller and quick-connect coupling.
2. Grease the top coupling point (4).
3. Loosen the nuts (2) on the articulated arm (1) all the way to the stop.
4. Deactivate the function "Automatically raise rear tiller when reversing" (OFF) in the menu (7).
5. Leave the menu and confirm the selection.
126
(255)
Figure 80: Mounting the rear tiller
9 - Attachments
Snow groomer BISON
BISON 908930245 - 30367