Tilting The Driver's Cab - Prinoth BISON Operating And Maintenance Manual

Table of Contents

Advertisement

Operating and Maintenance Manual
If one or both driver's cab doors is opened accidentally, both the vehicle and the cutter shaft are
brought automatically to a standstill. This protects the passenger and/or driver from being run
over by the tracks.
If the left armrest is raised, the parking brake is automatically applied.
The driver's cab can be titled forwards using an electro-hydraulic pump. When tilted to the front,
the driver's cab is supported mechanically.
In an emergency, the engine can be switched off using the easily accessible battery disconnec-
tion switch for switching the power supply on and off.
The batteries (storage batteries) are placed in a protected position, and the battery terminals are
insulated to prevent short circuits.
The hydraulic circuits for the traction drive and attachments are protected by safety pressure cut-
offs; this protects the hydraulic system and mechanical components from damage by external
causes (impacts, stresses).
5.2.1

Tilting the driver's cab

DANGER
Risk of tipping
Tilting the driver's cab changes the vehicle's centre of gravity.
Park the snow groomer on solid and level ground.
DANGER
Risk of crushing
if the driver's cab is lowered accidentally
Insert the safety strut.
NOTICE
Risk of contact
When tilting, the driver's cab can collide with the raised front blade.
Before tilting the driver's cab, drop the front blade to the ground.
Remove front attachments e.g. snow plough, bucket loader, halfpipe tiller and the associated
hydraulic/electrical connections before tilting the driver's cab.
Swivel the AUTOMATIC winch boom to the rear.
The tilt cab function can be activated up to 6 min after the ignition key has been turned off.
The driver's cab is tilted using the push-button below the right maintenance flap.
To tilt the driver's cab, proceed as follows:
1.
Park the snow groomer on solid and level ground.
2.
Remove all objects from the seats and instrument panel.
3.
Observe the notes above.
4.
Ignition key position: ON
40
(255)
5 - Vehicle
Snow groomer BISON
BISON 908930245 - 30367

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bison x908930245908930367

Table of Contents