Maintenance; General Maintenance Instructions - Prinoth BISON Operating And Maintenance Manual

Table of Contents

Advertisement

Snow groomer BISON
15.8

Maintenance

15.8.1

General maintenance instructions

To avoid accidents and injury during maintenance and servicing, pay particular attention to the follow-
ing instructions:
The service personnel assigned to maintenance and repair work must be familiar with the me-
chanical, hydraulic and electrical systems. They must be aware of the dangers involved in techni-
cal procedures performed on the AUTOMATIC winch and accessories.
Regular maintenance will extend the AUTOMATIC winch's service life. In case of extended oper-
ating periods or difficult operating conditions, lubrication and maintenance intervals should be re-
duced accordingly.
Any defects or damage found during maintenance should be corrected immediately. If there is an
obvious danger to operating personnel or to the equipment itself, put the AUTOMATIC winch out
of service immediately and do not put back into operation until the problem has been resolved.
Failure to observe the instructions and maintenance intervals may lead to reduced operational
availability and damage of the AUTOMATIC winch. PRINOTH cannot accept liability for damage
to property or physical injuries that result from failure to observe the maintenance intervals and
carry out the required maintenance work. In these cases, all warranty claims are void.
The maintenance work are to be carried out as indicated on the lubrication and maintenance ta-
bles and according to the intervals specified by the manufacturer.
In carrying out the maintenance work, follow the safety instructions and the general and national
accident prevention regulations of the appropriate safety organisations.
CAUTION
Risk of poisoning
Inhaling exhaust fumes can lead to poisoning.
Ensure that there is sufficient ventilation for operation in enclosed spaces.
CAUTION
Risk of scalding and burns
Hot fluids and components can cause injury.
Do not touch the engine with bare hands when it is at operating temperature.
Wear suitable protective gloves, clothing, and safety glasses.
WARNING
Risk of injury and death
if maintenance or repair work on the engine is carried out incorrectly.
Repair work on and modifications of the engine should always be carried out by an authorized
service center as only they have the necessary specialist knowledge and tools for this kind of
work.
BISON 908930245 - 30367
Operating and Maintenance Manual
15 - AUTOMATIC Winch
235
(255)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bison x908930245908930367

Table of Contents