Operating Fluids - Prinoth BISON Operating And Maintenance Manual

Snow groomer BISON
10.8 PETU and Aftertreatment identification plates
■ Identification plate, component designation and serial number
■ The identification plate is located underneath the support
structure of the unit.
■ The identification plate is located behind the dosing compo-
nents.
10.9

Operating fluids

CAUTION
Fire hazard
Operating fluids are highly flammable.
► Fire, open flame and smoking are prohibited.
► Do not allow operating fluids to drip or splash onto electrical systems or hot surfaces.
► Immediately clean up any spilled fuel.
NOTICE
Risk of engine damage
Even very small dirt particles can cause engine damage and premature wear.
► Ensure the utmost cleanliness when handling operating fluids.
Structural components and lubricants must be compatible with each other. Therefore, only brands
tested and approved by Caterpillar must be used.
Special lubricant additives are not required. Use of special additives may negatively affect warranty
claims.
Operating fluids are:
■ Diesel fuels
■ Lubricants, such as engine and gear oils, hydraulic oil, greases
■ Antifreeze, coolant
BISON 908930245 - 30367
Operating and Maintenance Manual
10 - Engine system
Location of the identification plate
Location of the identification plate
141
(255)