Adjusting The Driver Seat; Slide Function (Optional) - Prinoth BISON Operating And Maintenance Manual

Snow groomer BISON
5.3.1

Adjusting the driver seat

CAUTION
Risk of accident
Adjusting the driver seat while driving can lead to accidents.
► Only adjust the driver seat when the vehicle is stopped.
► Effective protection will be obtained only if head rests are correctly adjusted and safety belts are
worn.
■ Fold up the consoles and adjust the inclination and depth:
The consoles (4 and 7) can be folded up to make it easier to get in and out of the cabin. The
angle and depth of the consoles can be adjusted. For the steering console, use the knob (8)
for the angle and the lever (9) to lock/unlock the swivel motion.
■ Folding the backrest :
Push down the button (6) to fold down (forward) the backrest if an access is required behind
the seat.
■ Adjusting the backrest angle:
Push the button (10) in the desired direction until the backrest is in the desired position. Re-
move any pressure on the backrest to adjust it more easily.
■ Adjusting the lumbar support:
The button (11) can be used to adjust the lumbar support (up / down, forward / backward).
■ Adjusting the side bolsters :
Turn the knob (3) clockwise or counterclockwise to adjust the side bolsters in a narrower or
wider position.
■ Switching the seat heating on and off:
The seat heating can be switched on and off (ON / OFF) by pressing the switch (12).
■ Adjusting seat suspension and height:
Seat suspension and height can be adjusted by pushing in or pulling out the spring loaded but-
ton (14).
■ Adjusting the seat tilt angle:
The tilt angle of the base cushion can be adjusted by turning the hand wheel (13).
■ Adjusting the seat fore / aft position:
Pull the lever (15) upward, then push the seat forward or backward to obtain the desired posi-
tion. After releasing the lever, check that the seat frame is correctly engaged.
■ Adjusting the head restraint:
The angle and height of the head restraint (1) can be adjusted manually.
■ Adjusting the seat belt :
The seat belts (2) can be adjusted to fit the size of the driver.
5.3.2

Slide function (optional)

In addition to the standard functions, the driver seat can be equipped with a slide function to move the
seat sideways. It offers the driver to sit in the center or on the left-hand side of the cab and to swivel
the seat into three different positions.
BISON 908930245 - 30367
Operating and Maintenance Manual
5 - Vehicle 45
(255)