Table of Contents
Advertisement
Snow groomer BISON
13.
Make sure the hydraulic hoses are correctly routed.
14.
Check the hydraulic hoses and bolt fittings for leaks; investigate any oil leak immediately.
9.2.3
Installing and stowing the side cutters
The side cutters are to be installed as follows:
Pos. Name
1
2
3
A
B
1.
Lower the front blade to the ground and turn off the engine.
2.
Remove the locking pins (2) from the bolts (3).
3.
Hold the side cutter (1) and remove the bolts (3) locking the side cutter to the brackets of the
stow position (A).
4.
Position the side cutter vertically at the extremity of the blade wing in the brackets of the work-
ing position (B).
5.
Insert the bolts (3) in the brackets. Secure with the locking pins (2).
6.
Install the other cutter the same way.
BISON 908930245 - 30367
Side cutter
Locking pin
Bolt
Stow position
Work position
Operating and Maintenance Manual
Figure 79: Park blade with side cutter
9 - Attachments
125
(255)
Advertisement
Table of Contents
