Tilt And Straighten The Winch Arm - Prinoth BISON Operating And Maintenance Manual

Table of Contents

Advertisement

Operating and Maintenance Manual
4.
Turn down the locking lever and secure
with the locking pin (7): AUTOMATIC
winch locks (3).
15.5.4

Tilt and straighten the winch arm

NOTICE
Risk of collision
When tilted, the winch arm can collide with the driver's cab or other structures.
Before tilting, turn the winch arm to the rear.
Do not swivel tilted winch arms.
Control the tilting speed with the hand pump lever.
NOTICE
Correct oil level
Check the oil level in the hand pump tank.
Only check the oil level with the winch arm tilted and with the vehicle on horizontal ground.
The oil level must come up to the filler hole - if necessary, top up with the specified oil.
When swivelled to the rear, the winch arm can be tilted to the side. The winch arm can only be tilted
and aligned using the hydraulic hand pump (1) at the front right on the drum winch frame. The pump
lever (2) required for this is located on the front side of the drum winch frame.
If necessary, tilt the winch arm to the side (e.g. height). There are two possible positions.
Never use the snow groomer with the winch arm tilted in this way.
Tilt the winch arm to the side
1.
Turn the winch arm to the rear.
2.
Release cable (with manual cable unwind push-button switch).
216
(255)
15 - AUTOMATIC Winch
Snow groomer BISON
BISON 908930245 - 30367

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bison x908930245908930367

Table of Contents