Table of Contents
Advertisement
Snow groomer BISON
6.
Press the Operational readiness of the attachment switch (S85) to "ON".
console" (p. 52)
7.
Drive the snow groomer slowly up to the rear tiller.
8.
Connect the rear tiller at the top (4).
9.
Slightly raise the rear tiller using button (T) and push-button switch (S1) and check if articulat-
ed arm pivot is properly connected to the mounting socket. If necessary, move the link arm to
the left or right to facilitate mounting.
10.
Make sure the rear tiller is correctly engaged.
11.
Tilt both threaded rods (3) to secure the tiller to the articulated arm pivot (1).
12.
Tighten both nuts (2) with the tools (5) supplied to 400 Nm ( (295 ft-lb)).
13.
Secure both nuts (2) using the tools (5) supplied and the locking pins (6).
14.
Reactivate the function "Automatically raise rear tiller when reversing" (ON) in the menu (7).
15.
Leave the menu and confirm the selection.
16.
Press the Operational readiness of the attachment switch (S85) to "OFF".
console" (p. 52)
9.3.2
Mounting the POWER tiller with an adaptor
CAUTION
Risk of crushing
When moving the snow groomer up to the rear tiller.
►
Keep the danger zone clear of personnel.
Pos. Name
1
2
3
BISON 908930245 - 30367
1
2
Figure 81: Adaptor between Power tiller and rear lift frame
POWER tiller
Adaptor
Rear lift frame of the vehicle
Operating and Maintenance Manual
3
9 - Attachments
➽ See "Control
➽ See "Control
127
(255)
Advertisement
Table of Contents
