Mounting The Winch - Prinoth BISON Operating And Maintenance Manual

Operating and Maintenance Manual
■ Tighten the bolts that fasten the AUTOMATIC winch to the snow groomer frame, applying the
tightening torques indicated in the drawing.
■ Check for cracks visible on the fastening system.
15.6.2

Mounting the winch

WARNING
Risk of accident
If not mounted properly, the AUTOMATIC winch may come loose and fall off, causing injuries.
► Before releasing the belt straps, ensure that the AUTOMATIC winch is properly fixed to the
snow groomer.
NOTICE
Risk of damage to the hydraulic system
Even the smallest particles of dirt or impurities getting into the oil can result in damage to the hydraul-
ic system.
► AUTOMATIC winch mounted: store the protective caps in the driver's cab's tool compartment.
Pos. Name
1 Belt straps
2 Eyelet
3 Rear bolt
4 Locking lever
5 AUTOMATIC winch locked
6 AUTOMATIC winch unlocked
7 Safety pin
220
(255)
Figure 121: AUTOMATIC winch
15 - AUTOMATIC Winch
Snow groomer BISON
BISON 908930245 - 30367