Controlling Front Attachments - Prinoth BISON Operating And Maintenance Manual

Snow groomer BISON
NOTICE
► Even when the speed is set with the engine speed potentiometer, the driver remains responsi-
ble for operating the vehicle in a safe and appropriate manner.
NOTICE
Vehicle standstill
Please note, particularly in hazardous situations, that the vehicle can be brought to a standstill as fol-
lows when the engine speed potentiometer is active:
► Turn the engine speed potentiometer counter-clockwise to MIN.
► Put the steering levers in neutral position.
The engine speed potentiometer is located on the control console.
■ Turn the engine speed potentiometer clockwise = increase the speed (continuously variable up
to MAX)
■ Turn the engine speed potentiometer counter-clockwise = decrease the speed (continuously
variable down to MIN)
8.9

Controlling front attachments

■ Front blade
■
NOTICE
Risk of contact
Due to the large working range of the front blade, it may hit the outside mirror or the driver's
cab itself.
►
The front blade attached at the front is controlled using the joystick.
□
■ Snow plough (optional)
BISON 908930245 - 30367
Apply the utmost caution when moving the front blade, snow plough or loader.
Used along with the push-button switches on the joystick, all the available attachment
functions can be performed with one hand. The individual functions of each of the push-
button switches depend on the type of equipment and can therefore vary.
Operating and Maintenance Manual
8 - Driving 119
(255)