Table of Contents
Advertisement
Snow groomer BISON
■
Before starting the engine, you should read the operating and maintenance instructions carefully
and familiarise yourself with "critical" points. If you are unsure of anything, please contact your
Prinoth authorised agent.
■
The methods recommended here are limited to the most important features. The illustrations
show operating personnel the correct method for checking, starting, stopping and operating the
engine. Only authorised operating personnel are allowed to start the engine. Make sure that the
engine is not started by an unauthorised person.
Operating safety
■
Most accidents which occur while operating, maintaining or repairing vehicles are due to failure to
observe basic safety rules and precautions. Accidents can often be avoided by identifying possi-
bly dangerous situations in advance. Operating personnel must be aware of the dangers and
must possess the correct training, skills and tools in order to be able to carry out these opera-
tions. The safety instructions must be read and understood before starting up the engine, and
carrying out lubrication and maintenance work.
■
An engine's operating safety depends on its professional installation in the overall system. The
indicators and monitoring devices (charging pressure/oil pressure/coolant temperature, etc.)
should also be checked to ensure they are functioning correctly. By observing the specified main-
tenance intervals and carrying out the required maintenance work correctly, you will fulfil some of
the conditions required for operating the engine safely.
■
For startup and maintenance, pay particular attention to the "Safety Instructions" section in this
chapter!
11.2
Safety instructions
In order to prevent accidents with personal injury and property damage during the maintenance and
servicing of the vehicle, pay particular attention to the following safety instructions:
CAUTION
Risk of accident
The risk of injury increases if personnel is not aware of the possible accidents during maintenance
work.
►
Before carrying out maintenance work and repairs, read the relevant sections of the technical
documentation, such as the operating and maintenance manual.
►
Familiarise yourself with the legal requirements such as health, safety and accident prevention
regulations.
CAUTION
Risk of accident
An injury could occur if maintenance or servicing on the engine is carried out incorrectly
►
Repair work on and modifications of the engine should always be carried out by an authorised
service centre as only it has the necessary technical knowledge and tools for this kind of work.
BISON 908930245 - 30367
Operating and Maintenance Manual
11 - Maintenance
151
(255)
Advertisement
Table of Contents
