Maintenance Plan - Prinoth BISON Operating And Maintenance Manual

Operating and Maintenance Manual
11.9

Maintenance plan

Work to be performed
TRACKS
Check track condition and
tension, adjust tension if re-
quired
Check bolt torque on tracks,
retighten if required. If in-
stalled, check torque on ice
caulk supports
Check the polymer track
guards on frame, replace if
required
DRIVE
Swap sprockets from side
to side, replace if required
Check torque on sprocket
retaining bolts, retighten if
required
Change oil on planetary
gearboxes
Check planetary for leak
and damage
HUB, WHEEL and TIRE
Lubricate grease point on
wheel hubs
Check retaining bolt torque
on all wheels
Check and adjust wheel
bearings
SUSPENSION
Lubricate all grease points
Check bolt torque on flexi-
tors and suspension crank
arm threaded pin
Check suspension settings,
adjust if required
Check and adjust spring
washer arrangement on
front beam axle retaining
bolts
Replace the 2 bolts retain-
ing the front axle to the
frame
162
(255)
Table for maintenance work on the BISON
X
First 150 hours
X
First 150 hours, then every 500 hours
X
X X X
X X
X X X
X
11 - Maintenance
Snow groomer BISON
Operating hours
X
X X X
X
X X
X X X X X
X X X
X X X X X
Every season
Seasonal
X
X
X
X
X
X
X
X
BISON 908930245 - 30367