Attachments; Establish Operational Readiness Of The Attachments; Front Blade; Adjusting The Park Pusher Frame - Prinoth BISON Operating And Maintenance Manual

Operating and Maintenance Manual
9

Attachments

9.1

Establish operational readiness of the attachments

The operational readiness of the attachments must be expressly activated so that the attachments
cannot be inadvertently set in motion by the engine.
The operational readiness of the attachments can only be switched on under the following conditions:
■ The engine is running.
■ Both cab doors are closed.
■ The Emergency OFF switch is released.
After the following situations, the operational readiness of the attachments is switched off automatical-
ly and must be switched on again:
■ The engine has been switched off.
■ One of the cab doors has been opened.
■ The Emergency OFF switch has been pressed.
■ Use rocker switch (2) on the control con-
sole to activate/deactivate the operational
readiness of the attachments:
□
□
9.2

Front blade

9.2.1

Adjusting the park pusher frame

CAUTION
Pinch point hazard
The roll cylinder is heavy, install a support before removing the holding pin.
► Use the appropriate tools to manupulate the cylinder and avoid back injuries
122
(255)
Press rocker switch upwards = op-
erational readiness of attachments
ON
Press rocker switch downwards = op-
erational readiness of attachments
OFF
9 - Attachments
Snow groomer BISON
BISON 908930245 - 30367