Prescribed Maintenance Work - Prinoth BISON Operating And Maintenance Manual

Snow groomer BISON
NOTICE
Risk of damage to electronic equipment
Improper interventions on electronic components and related software can impair the functionality of
components. As the electronic systems are also networked, modifications made to these systems
can also affect systems that have not been changed.
► Intervention on electronic components should be performed by authorized personnel.
11.3

Prescribed maintenance work

Personnel-Category
The service personnel appointed for the maintenance and repair work must be familiar with the en-
gine and with mechanical, hydraulic and electrical systems. They must be aware of the dangers in-
volved in technical operations on the vehicle and its attachments or accessories.
■ Regular maintenance will extend the service life of the vehicle and its accessories. The lubrica-
tion and maintenance intervals should be shortened in the case of longer operating times or diffi-
cult operating conditions.
■ When obtaining spare parts, carrying out repair and maintenance work, making warranty claims
etc., it is essential that all required identification data are provided. The respective data can be
found on the data stickers.
■ Any defect or damage found during maintenance should be corrected immediately. If there is an
obvious danger to operating personnel or to the equipment itself, the vehicle or accessory should
be put out of service immediately, and should not be put back into operation until the fault or fail-
ure has been corrected.
■ Failure to follow the instructions and the maintenance intervals can lead to reduced service, or
damage to the vehicle or accessory. PRINOTH cannot accept liability for damage to property or
physical injuries that result from failure to observe the maintenance intervals and carry out the
required maintenance work. In these cases, all warranty claims are void.
■ The maintenance work is to be carried out as indicated on the lubrication and maintenance tables
and according to the intervals specified by the manufacturer.
■ In carrying out the maintenance work, follow the safety instructions and the general and national
accident prevention regulations of the appropriate safety organisations.
BISON 908930245 - 30367
Operating and Maintenance Manual
11 - Maintenance 153
(255)