Table of Contents
Advertisement
3.E. Operational Setup (continued)
Figure 19. Home screen. Selecting Run allows a purification run to be set up and performed (see Section 5).
Selecting Data Transfer allows transfer of run data from the instrument to a computer if you are using the Maxwell
Sample Track software (see Section 6), or it allows deletion of run data from the instrument. Selecting Setup opens the
Maxwell
16 Configuration screen.
®
Figure 20. Maxwell
16 Configuration screen. The functions to change the hardware (Hardware) and firmware
®
(Configuration) settings (see Section 7) are accessible from this screen. Also, the UV lamp may be run from this screen
(UV on; Section 8). This screen provides access to the service functions (Service mode; Section 11.B).
22
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM321 · Revised 4/15
®
www.promega.com
Advertisement
Table of Contents
