Table of Contents
Advertisement
3.E. Operational Setup (continued)
Figure 13. Confirmation screen for the Touch screen. Touch all four boxes, and if all change color, press the
Run/Stop button on the instrument keypad. If they do not all change color, press the back arrow button and repeat the
calibration and confirmation.
The "Touch Screen Configuration Successful" message indicates that the calibration was successful, and the Wizard can
continue.
3.
Date/Time. Select the Date/Time screen to set the current date and time. In the initial screens, select the
date and time formats. In the final Date/Time Setup screen, set the current time and date. Selecting each of the
screen options opens a keypad for adding numerical values.
Figure 14. Date/Time Setup screen.
18
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM321 · Revised 4/15
www.promega.com
Advertisement
Table of Contents
