Power Modules - HP A6604 Installation Manual

Power Modules

Table 1-3 Power module specifications
Rated voltage range
Maximum input current
Maximum power provided by one power module
Physical dimensions (H × W × D)
Power module slots
Power consumption range
Online insertion and removal
Online insertion and removal of a power module refers to first switching off the power module
and then removing it from the chassis or inserting it into the chassis. Before doing that, make
sure that the router is configured with redundant power modules and the system services are
running normally.
Figure 1-7 AC power module
(1) Captive screw
(3) Power socket
(5) Power LED
Item Specification
AC powered: 100 VAC to 240 VAC; 50 Hz or 60 Hz
DC powered: –48 VDC to –60 VDC
AC powered: 10 A
DC powered: 25 A
650 W
40 × 140 × 354 mm (1.57 × 5.51 ×13.94 in.)
Two power module slots are provided. The power
modules must have the same specifications.
A6604: 75.9W~341.2W
A6608: 86.4W~559W
Supported
(2) Bail latch
(4) Power switch
(6) Power module handle