UPDATING YOUR MACHINE'S SOFTWARE
UPDATING YOUR MACHINE'S SOFTWARE
You can update your machine's software using the
following two procedures.
Update Procedure Using USB
Media
When an update program is available on " https://
s.brother/cpdab/ ", please download the files
following the instructions on the website and steps
below.
Note
• Use a USB media with a capacity from 4 GB
to 32 GB when updating the machine. Check
that no data other than the update file is
saved on the USB media being used before
starting to update.
• Some USB media may not be usable with this
machine. Please visit our website " https://
s.brother/cpdab/ " for more details.
a
While pressing the "Automatic Threading"
button, turn the main power to ON.
The following screen will appear on the LCD.
b
Touch
c
Insert the USB media into the USB port
corresponding to the key touched in step
b
. USB port on the machine. The media
device should only contain the update file.
a
a USB media
b USB port
196
or
.
d
Touch
to update the machine.
*
Do not turn off the machine during the update.
When updating is finished, the completion message
appears.
e
Remove the USB media, and turn the
machine off and on again.