UPDATING YOUR MACHINE'S
SOFTWARE
You can update your machine's software using the
following two procedures.
Update Procedure Using USB Media
When an update program is available on https://s.brother/
cpeag/, please download the files following the instructions
on the website and steps below.
Note
• When using USB media to update the software,
check that no data other than the update file is
saved on the USB media being used before
starting to update.
a
While pressing
(Automatic threading button),
turn the main power to ON.
b
Touch
.
c
Insert the USB media into the primary (top) USB port
on the machine.
d
Touch
.
When updating is finished, the completion message
appears.
e
Turn the machine off, remove the USB media, and turn
the machine on again.
UPDATING YOUR MACHINE'S SOFTWARE
Update Procedure Using Wireless LAN
Connection
If the machine is connected to a wireless network with a
strong, reliable connection, update files can be downloaded
directly to the machine using this network.
For details on the wireless LAN connection, refer to page 19.
Memo
• The machine periodically checks if there is a new
update file on the server. When there is a new
update file, the wireless LAN key is displayed as
.
a
Display page 7 of the settings screen.
b
Touch
.
*
The machine starts to download the update file, if
there is a new update file on server.
1
1 When the wireless LAN key appears as
causes the machine to check if there is a new
update file. If there is a new file, downloading begins.
Note
• Do not turn off the machine during the download.
• Touch
to pause the download. To
restart, touch
c
When downloading is finished, turn off the machine,
then hold down
(Automatic threading button)
while turning on the machine.
, touching
.
121
5