Table of Contents
Advertisement
LOWER THREADING
LOWER THREADING
Winding the Bobbin
IMPORTANT
• Use the plastic bobbins that came with this
machine or bobbins of the same type: 11.5
mm (approx. 7/16 inch) plastic Class 15 (A
style) bobbins, which are available from your
Brother dealer.
■ Using the Supplemental Spool Pin
With this machine, you can wind the bobbin during
sewing. While the main spool pin is being used for
sewing, you can wind a bobbin by using the
supplemental spool pin.
a Supplemental spool pin
a
Turn the main power to ON and open the
top cover.
b
Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
a
a Groove in the bobbin
b Spring on the shaft
40
a
c
Set the supplemental spool pin in the "up"
position.
a Supplemental spool pin
d
Place the spool of thread on the
supplemental spool pin, so that thread
unrolls from the front. Push the spool cap
onto the spool pin as far as possible to
secure the thread spool.
a Spool cap
b Spool pin
c Thread spool
IMPORTANT
• If the spool or the spool cap is not installed
correctly, the thread may become tangled
around the spool pin and the machine may be
damaged.
• Three spool cap sizes are available, allowing
you to choose a spool cap that best fits the size
of spool being used. If the spool cap is too
small for the spool being used, the thread may
catch on the slit in the spool or the machine
may be damaged. When using mini king thread
spool, use the thread spool insert.
For details on thread spool insert (mini king
thread spool), refer to "Note" on page 41.
Advertisement
Table of Contents
