Table of Contents
Advertisement
SELECTING UTILITY STITCHES
Selecting a Stitch
a
Turn the main power to ON and touch
to display the utility stitches.
Either [1-01 Straight stitch (Left)] or [1-03 Straight
stitch (Middle)] is selected, depending on the setting
selected in the settings screen.
b
Select the category of the stitch pattern you
want to sew.
Memo
• Swipe the key of a category sideways to
display hidden categories.
c
Touch the key of the stitch you want to sew.
Memo
• For details on each stitch, refer to "STITCH
SETTING CHART" on page 198.
94
■ Using the Mirror Image Key
Depending on the type of utility stitch you select,
you may be able to sew a horizontal mirror image of
the stitch.
Memo
• If
is light gray after you select a stitch, you
cannot create a horizontal mirror image of the
selected stitch due to the type of stitch or
type of presser foot recommended (this is true
of buttonholes, multi-directional sewing, and
others).
Touch
then
to create a horizontal mirror
image of the selected stitch.
The key will display as
.
Advertisement
Table of Contents
