Brother 882-W33 Operation Manual page 117

Hide thumbs Also See for 882-W33:
Table of Contents

Advertisement

d
Attach free motion open toe quilting foot
"O" by positioning the pin of the quilting
foot above the needle clamp screw and
aligning the lower-left of the quilting foot
and the presser bar.
a Pin
b Needle clamp screw
c Presser bar
Note
• Make sure that the quilting foot is not slanted.
e
Hold the quilting foot in place with your
right hand, and tighten the presser foot
holder screw using the multi-purpose
screwdriver with your left hand.
*
Use the multi-purpose screw driver setting the
position to "1". (page 15)
a Presser foot holder screw
CAUTION
• Be sure to securely tighten the screw with the
included multi-purpose screwdriver.
Otherwise, the needle may touch the quilting
foot, causing it to break and causing injury.
f
Use both hands to stretch the fabric taut,
and then move the fabric at a consistent
pace in order to sew uniform stitches
roughly 2.0-2.5 mm (approx. 1/16 - 3/32
inch) in length.
a Stitch
g
Touch
to cancel the free motion sewing
mode.
 Rotate the handwheel toward you
(counterclockwise) to raise the feed dogs.
■ Echo Quilting Using the Free Motion
Echo Quilting Foot "E"
Sewing quilting lines at equal distances around a
motif is called echo quilting. The quilting lines,
which appear as ripples echoing away from the
motif, are the distinguishing characteristic of this
quilting style. Use the free motion echo quilting foot
"E" for echo quilting. Using the measurement on the
presser foot as a guide, sew around the motif at a
fixed interval. We recommend attaching the foot
controller and sewing at a consistent speed.
Free motion echo quilting foot "E" measurement
a 6.4 mm (approx. 1/4 inch)
b 9.5 mm (approx. 3/8 inch)
a
Select
.
b
Touch
then
free motion sewing mode.
 The key appears as
the necessary height, then the feed dogs are lowered
for free motion sewing.
c
Follow the steps on page 57 to remove the
presser foot.
d
Remove the presser foot holder and then
attach the adapter. (page 58)
SEWING THE STITCHES
E
to set the machine to
, the presser foot is raised to
3
115

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp3

Table of Contents