Table of Contents
Advertisement
j
Select any of the straight stitches.
Memo
• Selecting unavailable stitches will cause an
error message to be displayed.
• When the straight stitch needle plate is on the
machine, the needle will automatically move
to the middle position.
Note
• Slowly rotate the handwheel toward you
(counterclockwise) before sewing and make
sure that the needle is not contacting the
straight stitch foot and straight stitch needle
plate.
k
Start sewing.
*
After sewing, make sure to turn off the machine and
to remove the straight stitch needle plate and the
straight stitch foot. Reinstall the regular needle plate
and the presser foot "J".
Dart Seam
a
Select
and attach presser foot "J".
b
Sew a reverse stitch at the beginning of the
dart and then sew from the wide end to the
other end without stretching the fabric.
a Basting
c
Cut the thread at the end leaving 50 mm
(approx. 2 inches), and then tie both ends
together.
*
Do not sew a reverse stitch at the end.
d
Insert the ends of the thread into the dart
with a hand sewing needle.
e
Iron the dart to one side so that it is flat.
SEWING THE STITCHES
3
101
Advertisement
Table of Contents
