Upgrading Your Machine's Software; Upgrade Procedure Using Usb Media - Brother 884-T11 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Upgrading Your Machine's Software

You can use USB media or a computer to download software upgrades for your embroidering machine.
When an upgrade program is available on " http://support.brother.com ", please download the files
following the instructions on the website and steps below.
You can use USB to download software upgrades/updates (**********.upf) for your sewing machine.
● When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used for this upgrade.
Upgrade procedure using
USB media
1 While pressing the automatic threading
button, turn the main power to on.
The following screen will appear on the
LCD.
2 Touch
Note
.
3 Insert the USB media into the primary (top)
USB port on the machine. The media device
should only contain the upgrade file.
1 Primary (top) USB port for media
2 USB media
Note
● The access lamp will begin blinking after
inserting USB media, and it will take about
5 to 6 seconds to recognize the media.
(Time will differ depending on the USB
media).
4 Touch .
The upgrade file is downloaded.
Upgrading Your Machine's Software 309
7