Heirloom - Brother 882-W33 Operation Manual

Hide thumbs Also See for 882-W33:
Table of Contents

Advertisement

SEWING THE STITCHES

Heirloom

■ Hemstitching (Drawn Work (1))
a
Pull out several threads from one area on a
piece of fabric to open the area.
*
Pull out 5 or 6 threads to leave a 3 mm (approx. 1/8
inch) area open.
Memo
• Loosely woven fabrics work best for this.
b
Select
.
Memo
• For details on each stitch, refer to "STITCH
SETTING CHART" on page 198.
c
Attach advanced monogramming foot
"N+". With the right side of the fabric
facing up, sew one edge of the open area.
d
Touch
to create a mirror image of the
stitch.
124
e
Match beginning needle drop points on the
opposite edge of the open area to keep the
stitching symmetrical.
■ Hemstitching (Drawn Work (2))
a
Pull out several threads from both sides of
the 4 mm (approx. 3/16 inch) area which
are not yet open.
*
Pull out four threads, leave five threads, and then
pull out four threads. The width of five threads is
approximately 4 mm (approx. 3/16 inch) or less.
a Approx. 4 mm (approx. 3/16 inch) or less
b Four threads (pull out)
c Five threads (leave)
b
Select
.
Memo
• For details on each stitch, refer to "STITCH
SETTING CHART" on page 198.
c
Sew the decorative stitch in the center of
the five threads created above.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp3

Table of Contents