Zigzag Couching - Brother 882-W33 Operation Manual

Hide thumbs Also See for 882-W33:
Table of Contents

Advertisement

SEWING THE STITCHES

Zigzag Couching

You can easily sew decorative effects using yarn.
CAUTION
• When using yarn, we recommend selecting
yarn of weight 4 (MEDIUM
yarn is often referred to as worsted weight, 20
knitted stitches per 10cm, or 9-11 wraps per
inch. The diameter of the yarn is
approximately 2-3 mm (1/12-1/8 inch). If the
yarn is extremely thin or thick, has an unusual
shape (flat or furry), or more than 2 yarns, the
best finishing results may not be achieved, or
injuries or damage may result.
Note
• Sew test stitches on the fabric before sewing
on your project.
• We recommend using a stabilizer material
when sewing stretch fabrics, lightweight
fabrics, fabrics with a coarse weave, or fabrics
which are prone to fabric shrinkage.
■ Prepare for Zigzag Couching
a
Attach the spool stand to the machine.
At this time, do not raise the telescopic thread guide
shaft.
*
Refer to "Assembling the Spool Stand" on page 16.
126
b
). Medium
• There are two yarn guides: one for sewing
c
d
*
Insert the yarn guide for zigzag couching
into the slot on the top left of the machine.
Note
couching and one for embroidery couching.
Check the shape of the part, and then install
the appropriate guide.
a
b
a Yarn guide for sewing couching
b Yarn guide for embroidery couching
Touch
to lock all keys and buttons,
and then raise the presser foot lever.
Attach the compact dual feed foot to the
machine without attaching the couching
dual feed foot.
Refer to "Attaching the Compact Dual Feed Foot" on
page 59.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp3

Table of Contents