Setting the Stitch Length
Follow the steps below when you want to change
the stitch pattern length.
Example:
Touch
to shorten the stitch length.
The value in the display gets smaller.
Touch
to lengthen the stitch length.
The value in the display gets bigger.
Memo
• Touch
to save the stitch settings.
• Touch
to check changes made to the
stitch.
• Touch
to return the stitch length to
the original setting.
IMPORTANT
• If the stitches get bunched together, lengthen
the stitch length and continue sewing. Do not
continue sewing without lengthening the stitch
length. Otherwise, the needle may bend or
break.
Setting the [L/R Shift]
Follow the steps below when you want to change
the placement of the stitch pattern by moving it left
and right.
Example:
Touch
to shift the stitch pattern to the left.
The value in the display appears with a minus sign.
Touch
to shift the stitch pattern to the right.
The value in the display appears with a plus sign.
Memo
• Touch
to save the stitch settings.
• Touch
to check changes made to the
stitch.
• Touch
to return to the original
setting.
• For an alternate method of setting the [L/R
Shift] using the speed controller, refer to
page 99.
Note
• After adjusting the [L/R Shift], slowly rotate
the handwheel toward you (counterclockwise)
and check that the needle does not touch the
presser foot.
STITCH SETTINGS
2
73