Table of Contents
Advertisement
e
Follow the on-screen instructions to
complete the procedure.
1. Press the needle position button to raise the
needle.
2. After removing the needle and the presser
foot, affix white sticker on needle dropping
point area.
a White sticker
3. Insert the needle (standard size 75/11 or 90/
14).
Note
• Use a new sticker. The camera needle
position cannot be set correctly if there is a
hole in sticker or if it is dirty. If you have no
new stickers, contact your nearest authorized
Brother dealer.
4. Touch
to initiate the calibration
process. For safety please make sure area
around needle is clear prior to touching
.
Setting the camera needle position begins.
f
The operation is finished when [OK]
appears. If [NG] appears, affix a new white
sticker, and then touch
attempts to set the position are not
successful, contact your nearest authorized
Brother dealer.
*
*
g
. If multiple
Touch
to memorize the calibration data.
Touch
to back to original screen without
memorizing the calibration data.
Remove the sticker.
LCD SCREEN
1
27
Advertisement
Table of Contents
