Table of Contents
Advertisement
Four-Step Buttonholes
You can sew 4-step buttonholes using the
following 4 stitches together. You can sew any
desired length for the buttonhole when using 4-
step buttonholes. 4-step buttonholes are a good
option when attaching oversize buttons.
Note
• When changing the stitch settings, make sure
that all stitch settings are changed to match.
Stitch
Stitch name
4 steps buttonhole 1
4 steps buttonhole 2
4 steps buttonhole 3
4 steps buttonhole 4
Four-step buttonholes are sewn as shown below.
a
Mark the position and length of the
buttonhole on the fabric.
a
b
a Starting point
b End point
c Buttonhole sewing
b
Attach advanced monogramming foot
"N+", and select stitch
side of the buttonhole.
c
d
Presser foot
e
f
g
h
i
j
to sew the left
SEWING THE STITCHES
Press the "Start/Stop" button to start
sewing.
Sew the desired length for the buttonhole
and press the "Start/Stop" button again.
Select stitch
to sew the bar tack and
press the "Start/Stop" button.
The machine will automatically stop after sewing
the bar tack.
Select stitch
to sew the right side of the
buttonhole, and press the "Start/Stop"
button to begin sewing.
Sew the right side of the buttonhole and
press the "Start/Stop" button again.
*
Sew the right side of the buttonhole the same length
as the left.
Select stitch
to sew the bar tack and
then press the "Start/Stop" button.
The machine will automatically sew off the bar tack
tie and stop when the bar tack is complete.
Raise the presser foot and remove the
fabric.
Refer to page 130 to open the buttonhole.
3
133
Advertisement
Table of Contents
