Table of Contents
Advertisement
g
Select the functions to be performed by the
multi-function foot controller.
c
Controller
Functions that can be specified
a Main foot controller
Start/Stop
b Heel switch
Select any of the following:
• [Thread Cutting]
• [Needle Position – Up/Down]
c Side pedal
• [Single Stitch]
• [Reverse Stitch] (Reinforcement
Stitch) *
• [Presser Foot Up/Down]
• [No Setting]
*
If you set the "Reverse Stitch" function on the heel
switch, machine operates the same as pressing the
"Reverse Button" on the machine.
*
Reinforcement stitching may be applied depending
on the selected stitch pattern. For the details, refer to
"Automatic Reinforcement Stitching" on page 66.
Memo
• If you set [Reverse Stitch] on the side pedal,
you can create a darning stitch effect using
zigzag stitches. With both feet, keep pressing
the main foot controller, and repeat pressing
and releasing the side pedal to sew forward
and reverse in turn. Machine will reverse at
the speed you press the main foot controller.
h
Touch
.
i
Sew trial stitches and confirm that the
settings are as desired.
Pressing down on the main foot controller increases
the sewing speed; releasing the pressure on the main
foot controller decreases the sewing speed.
Release the main foot controller or side pedal to stop
sewing.
a
• The speed that is set using the sewing speed
controller will be the main foot controller's
maximum sewing speed.
b
• When the multi-function foot controller is
connected, the "Start/Stop" button cannot be
c
used to start sewing.
■ Adjusting the Length of the Cord for
the Main Foot Controller
a
Unwind the cord for the main foot
controller.
b
Guide the cord between the tabs.
c
Wind the cord until it is the desired length.
*
The cord can be wound either clockwise or
counterclockwise.
d
Pass the cord between the tabs.
• In order to avoid stepping on the cord with the
main foot controller, pass the cord between
the tabs.
• When storing the cord, pass it between the
tabs, and then insert the plug into the jack on
the main foot controller.
Memo
Note
Memo
SEWING
2
65
Advertisement
Table of Contents
