Table of Contents
Advertisement
e
Use the quilting appliqué stitch to attach
the appliqué. Sew around the edge while
dropping the needle as close to the edge as
possible.
a Appliqué
b Needle drop position
CAUTION
• Be careful that the needle does not strike a
basting pin during sewing. Striking a pin can
cause the needle to break, resulting in injury.
You can use the appliqué technique to attach
appliqué designs like the three pictured below.
a Dresden plate
b Stained glass
c Sunbonnet sue
■ Quilting with Satin Stitches
For better fabric control, use the foot controller to
sew with satin stitches. Set the speed control slide to
control the stitch width to make subtle changes in
the stitch width during sewing.
a
Attach the foot controller. (page 64)
b
Select
and attach presser foot "J".
c
Touch
in the length display to shorten
the stitch length.
Memo
• The setting will vary according to the kind of
fabric and the thickness of the thread, but a
length of 0.3 to 0.5 mm (approx. 1/64 to 1/32
inch) is best for satin stitches.
d
Touch
to use the speed control slide to
control the stitch width.
e
Set the [Width Control] to [ON].
SEWING THE STITCHES
3
111
Advertisement
Table of Contents
