Table of Contents
Advertisement
CHANGING THE PRESSER FOOT
g
Place the fabric under the compact dual
feed foot with the needle at the starting
point of the stitching.
h
Be sure that the feed position lever is
pushed down and the compact dual feed
foot is ready to sew.
a Feed position lever
Note
• Do not operate the lever while sewing.
Memo
• When the feed position lever is up, dual feed
function is not effective. When the feed
position lever is down, the black roller belt on
the compact dual feed is engaged.
60
■ Attaching/Detaching Toe
Attach the toe by aligning the pins with the notches
and snap it into place.
a
a Pins
b Notches
If you push down on the front and back part of the
compact dual feed foot, the toe of the compact dual
feed foot will snap off.
■ Adjusting the Amount of Fabric
Feeding by the Compact Dual Feed
Foot
The dual feed mechanism pulls the top fabric
according to the set stitch length. With troublesome
fabrics, fine tune the set length, by changing [Dual
Feed Feed Adjustment] in the settings screen.
a
The settings screen appears.
b
The Sewing settings screen appears.
c
Touch
.
Touch
.
Display page 2 of the Sewing settings
screen.
Advertisement
Table of Contents
