Table of Contents
Advertisement
■ Page 3
l Select whether utility stitches (
stitches (
) are displayed first in the stitch
selection screen.
m When set to [ON], reinforcement stitches are sewn
at the beginning and/or end of sewing for a
reinforcement stitch pattern, even when the
"Reverse Stitch" button is pressed. (page 66)
n You can activate this setting after connecting the
multi-function foot controller. (These settings are
not operable unless the multi-function foot
controller is attached to the machine.) (page 63)
o If this setting is set to [ON] with [End Point Setting]
set to [ON] in the stitch edit menu, the machine will
temporarily stop so the end point sticker can be
peeled off. (page 86)
General Settings
■ Page 4
l
m
n
o
) or quilting
a Change the display language.
b Change the brightness of the needle area and
c If the screen is not very clear in certain
d Turn both the upper and bobbin thread sensor
e Change the speaker volume. Increase the number
f Select the operation of the [Needle Position -
work area lights.
environments, you can adjust the brightness of the
screen.
[ON] or [OFF]. If it is turned [OFF], the machine can
be used without thread.
for louder volume, decrease for softer volume.
Stitch Placement] to [ON] or [OFF]. (page 78)
LCD SCREEN
1
a
b
c
d
e
f
21
Advertisement
Table of Contents
