Brother 882-W33 Operation Manual page 94

SELECTING UTILITY STITCHES
No. Display
q
r
s
t
u
v
w
x
/
y
92
Key Name
Reset key Touch this key to return the selected stitch pattern saved settings to the default
settings.
Thread tension key Shows the automatic thread tension setting of the currently selected stitch
pattern. You can use
[L/R Shift] key
Touch
stitch pattern to the left. This feature is not available for all stitch patterns. Only
those applicable will be shifted. The machine default setting is highlighted.
Stitch width and Shows the zigzag width and stitch length settings of the currently selected
stitch length key
stitch pattern. You can use
stitch length settings.
Automatic Touch this key to use the automatic reinforcement stitching (reverse stitching)
reinforcement stitch setting. If you select this setting before sewing, the machine will automatically
key sew reinforcement stitches at the beginning and end of sewing (depending on
the stitch pattern, the machine may sew reverse stitches).
Automatic thread Touch this key to set the automatic thread cutting function. Set the automatic
cutting key thread cutting function before sewing to have the machine automatically sew
reinforcement stitches at the beginning and end of sewing (depending on the
stitch pattern, the machine may sew reverse stitches) and trim the threads after
sewing.
Needle position Touch this key to select the needle stop position to be up or down. You can
setting key also check the needle mode setting (single or twin).
Single needle/down position
Single needle/up position
Twin needle/down position
Twin needle/up position
Pivot key / Auto Up
The pivot key appears when the needle position setting key is set to
key
Touch this key to select the pivot function. When the pivot function is selected,
stopping the machine lowers the needle and slightly raises the presser foot
automatically. In addition, when sewing is restarted, the presser foot is
automatically lowered.
The auto up key appears when the needle position setting key is set to
Touch the auto up key to raise the presser foot when the machine is stopped.
Thread color change Touch this key to change the thread color displayed on the screen.
key
Explanation
and to change the thread tension settings.
to shift the stitch pattern to the right or touch
and
to shift the
to adjust the zigzag width and
.
.
Page
72-74
74
73
72, 73
66
75
50, 76
68, 76
95