Xerox Phaser 8400 Service Manual page 178

Check Menu Value Key Table (Continued)
Common
5 Stage Interval
(us)
6 Transfix Interval
(us)
7 Exit Interval (us)
Simplex Path
8 Exitied Interval
(us)
Duplex Path (not reported for simplex movements)
8 Duplex
Turnaround
Interval (us)
9 Duplex Pick
Interval (us)
10 Duplex Stage
Interval (us)
General Troubleshooting
Reports the interval from the
time the engine software is
commanded to start the stage
process until the Preheat sensor
activates. (part way through the
stage paper motion).
Reports the interval from the
time the engine software is
commanded to start the transfix
process until the Strip sensor
activates. (part way through the
paper transfix motion).
Reports the interval from the
time the engine software is
commanded to start the transfix
process until the Exit sensor
activates (part way through the
paper transfix motion).
Reports the interval from the
time the engine software is
commanded to start the exit
process until the Exit sensor
deactivates.
Reports the interval from the
time the engine software is
commanded to start the duplex
exit process until the Strip
sensor deactivates.
Reports the interval from the
time the engine software is
commanded to start the duplex
pick process until the Deskew
sensor activates
Reports the interval from the
time the engine software is
commanded to start the stage
process until the Preheat sensor
activates. (part way through the
stage paper motion).
4-33