Right-Side Wiring Diagram - Xerox Phaser 8400 Service Manual

Right-Side Wiring Diagram

The arrows indicate which connectors you should look at for the Pest codes. The Pest
codes are displayed on the front panel.
15] No 14]
Display Power
6] Waste
Tray
17]
37,006.4x
Drum Heater
8] Add
Paper Tray
9] No
Handfeed
20]
13,387.4
21]
37,006.4x
Drum Heater
22]
37,006.4x
Drum Heater
23]
37,006.4x
Drum Heater
Add Paper [18] Waste Tray [16]
Dead [14] Maint. Kit [26]
No Display [15] 13,016.14x [28]
No Handfeed [19] 13,067.14x [27]
10-4
DEAD
3] 37,020.4x
Strip Solenoid
25]
37,014.4x
Drum Fan
24]
5,002.42
13,387.4 [20] 37,006.4x [23]
37,006.4x [17] 37,014.4x [25]
37,006.4x [21] 37,016.4x [29]
37,006.4x [22] 37,020.4x [13]
Phaser 8400 Printer Service Manual
Ensure the ground
clips are in front
of the I/O board.
29] 37,016.4x
HM Clutch
28]
13,016.4x
28]
13,067.4x
26]
Maintenance
Kit Missing
Ensure the
ground clips
are in place.
Grounds end
of pivot plate
shaft.
s8400-179