Xerox Phaser 8400 Service Manual page 161

Check Menu Value Key Table (Continued)
Tray 2 (Coding for 2
trays 3 and 4 is
the same as for
tray 2 with the R
value matching
the tray number)
Temperature Status - This test scans the thermocouples and reports data on the current
temperatures with the goal of providing a picture of the current temperature state of the
printer.
Test ID R Definition
#
Temperature 0 Reservoir Temp.
Status (deg c)
1 Left Jetstack
Temp. (deg c)
2 Right Jetstack
Temp. (deg c)
3 Preheater Temp.
(deg c)
4 Drum Temp.
(deg c)
5 M1 Ink Melt
Temp. (deg c)
6 M2 Ink Melt
Temp. (deg c)
7 M3 Ink Melt
Temp. (deg c)
8 M4 Ink Melt
Temp. (deg c)
4-16
0 9 - 31 unused
0 8 - No tray
1 7 - No paper
1 6 - plate not lifted
0 5 - Paper at tray pick sensor
1 4 - media length top
1 3 - media length bottom
1 2 - Media width top
0 1 - media width middle
0 0 - Media width bottom
Results Interpretation/Actions
Reports the current reservoir
temperature
Reports the current left jetstack
temperature
Reports the current right
jetstack temperature.
Reports the current preheater
temperature.
Reports the current drum
temperature.
Reports the current M1 ink melt
temperature.
Reports the current M2 ink melt
temperature.
Reports the current M3 ink melt
temperature.
Reports the current M4 ink melt
temperature.
Phaser 8400 Printer Service Manual