Xerox Phaser 8400 Service Manual page 181

Check Menu Value Key Table (Continued)
9 Duplex Preheat
Trailing Edge
Interval (us)
10 Duplex Strip
Trailing Edge
Interval (us)
11 Duplex Exit
Trailing Edge
Interval (us)
Paper Trailing edge Bounce Times, Duplex Paper Trailing Edge Bounce Times. -Paper is
picked and moved through either the simplex or duplex paper path to determine the paper
trailing edge bounce interval at each paper path sensor. R values have alternate definitions or
are unused depending on the pick tray and if simplex or duplex path was selected.
Test ID# R Definition
#
Common
0 Tray
1 Paper Size
Tray 4 pick
2 Tray 4 Pick
Bounce Interval
(us)
Tray 3 Pick
3 Tray 3 Pick
Bounce Interval
(us)
Tray 2 Pick
2 Unused
3 Unused
Tray 1 Pick
4-36
Reports the interval from the
time the engine software is
commanded to start the transfix
process until the Preheat sensor
deactivates. (part way through
the paper transfix motion).
Reports the interval from the
time the engine software is
commanded to start the exit
process until the Strip sensor
deactivates. (part way through
the paper exit motion).
Reports the interval from the
time the engine software is
commanded to start the duplex
pick process until the Exit
sensor deactivates.
Results Interpretation/Actions
Reports the tray from which the
paper was picked
Reports size of the picked paper
Reports the interval during
which the Tray 4 Pick sensor
bounces following the passage
of the paper trailing edge.
Reports the interval during
which the Tray 3 Pick sensor
bounces following the passage
of the paper trailing edge.
Phaser 8400 Printer Service Manual