Disabling Jet Substitution Mode - Xerox Phaser 8400 Service Manual

Disabling Jet Substitution Mode

After the printhead is replaced, disable Jet Substitution Mode to restore normal
operation.
Using the hidden Jet Substitution Mode Menu, select Jet Select.
1. On the Front Panel, scroll to
2. Scroll to Print Quality
3. Press and hold the Up Arrow button, then press the Back button.
4. Turn Jet Substitution Mode
Scroll to
5.
Print the Eliminate Light Stripes test page to verify that Service Mode is disabled
for all jets.
Adjustments and Calibrations
Troubleshooting, then press the OK button.
Problems, then press the OK button.
Off, then press the OK button.
6-11