Table of Contents
Advertisement
12.4 Configuring Quota Mode
Purpose:
Each camera can be configured with allocated quota for the storage of recorded files.
Steps:
1.
Enter the Storage Mode interface.
Menu > HDD > Advanced
2.
Set the Mode to Quota, as shown in Figure 12. 16.
The NVR must be rebooted to enable the changes to take effect.
3.
Select a camera for which you want to configure quota.
4. Enter the storage capacity in the text fields of Max. Record Capacity (GB).
5. You can copy the quota settings of the current camera to other cameras if required. Click the Copy button to
enter the Copy Camera menu, as shown in Figure 12. 17.
6. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of IP
Camera to select all cameras.
7.
Click the OK button to finish the Copy settings and back to the Storage Mode interface.
8.
Click the Apply button to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record.
Network Video Recorder User Manual
Figure 12. 16 Storage Mode Settings Interface
Figure 12. 17 Copy Settings to Other Camera(s)
184
Advertisement
Table of Contents
