Configuring Quota Mode - HIKVISION HWN-2100H Series User Manual

Select OK to start initialization.
After the HDD has been initialized, the status of the HDD will change from
Uninitialized to Normal.
Initializing the HDD will erase all data on it.

Configuring Quota Mode

Purpose:
Each camera can be configured with allocated quota for the storage of recorded files.
Go to Menu > HDD > Advanced.
Set Mode to Quota, as shown in Figure 10-6.
The NVR must be rebooted to enable the changes to take effect.
Network Video Recorder User Manual
Confirm Initialization
Status changes to Initializing
HDD Status Changes to Normal
124