Technical Specifications; Vehicle Identification Number; Brake System; Wheel And Tire Torque Specifications - RAM 1500 2WD 2021 Owner's Manual

Table of Contents

Advertisement

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is found
on the left front corner of the instrument panel,
visible through the windshield.
Vehicle Identification Number
NOTE:
It is illegal to remove or alter the VIN.

TECHNICAL SPECIFICATIONS

BRAKE SYSTEM

If power assist is lost for any reason (for
example, repeated brake applications with the
engine off), the brakes will still function.
However, you will experience a substantial
increase in braking effort to stop the vehicle.
If either the front or rear hydraulic system loses
normal braking capability, the remaining
system will still function with some loss of
overall braking effectiveness. This will be
evident by increased pedal travel during
application, greater pedal force required to slow
or stop, and the "Brake Warning Light" and the
"ABS Warning Light" will activate during brake
use.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/
bolts should be torqued using a properly
calibrated torque wrench using a six sided (hex)
deep wall socket.
T
S
ORQUE
PECIFICATIONS
Lug Nut/
**Lug
Lug Nut/
Bolt
Nut/Bolt
Bolt Type
Torque
Size
130
M14 x
Ft-Lbs
Cone
1.50
(176 N·m)
**Use only authorized dealer recommended lug nuts/
bolts and clean or remove any dirt or oil before tightening.
467
Lug Nut/
Bolt
Socket
Size
22 mm
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

1500 4wd 2021

Table of Contents