Supermicro SuperServer E403-9D-16C-IP User Manual page 87

Onboard LAN Option ROM Type
Use this feature to select which firmware type to be loaded for onboard LAN devices. The
options Legacy and EFI. Select Legacy to display and configure the Onboard LAN1 - LAN13
Option ROM features.
Onboard LAN1 - LAN13 Option ROM
Use this feature to select which firmware function to be loaded for the specified LAN port
used for system boot. The options for LAN1 Disabled, PXE, and iSCSI. The options are LAN2
- LAN13 are Disabled and PXE.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If the feature above is set to Enabled, the next six features will be available for
configuration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE boot wait time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.
87
Chapter 6: UEFI BIOS